Product Details
- Product type: Pod housing replacement
- Brand: Zodiac
- Part number: R0512000
- Compatible system type: Select Zodiac AquaPure Ei Series electronic salt water chlorine generators
- Known compatible models: APURE35 and APURE35PLG
- Use: Replacement housing for compatible AquaPure Ei generator assemblies
- Best use case: Replacing a cracked, leaking, or damaged pod housing while keeping the existing compatible system
- Package contents: Confirm whether seals, O-rings, plugs, adapters, or hardware are included before purchase
- Installation requirement: Confirm model fitment and inspect nearby seals before ordering
Compatibility and Buyer Check
Before ordering, confirm that your AquaPure Ei system manual calls for part number R0512000. This housing should be selected by part number, system model, housing shape, and connection fitment, not by image alone.
If the electrode assembly is worn or damaged, compare this housing with the Zodiac R0511400 35 electrode replacement before replacing only the housing. If the adapter or locking area also needs service, review the Zodiac R0519800 Goldline cell adapter replacement and Zodiac R0511300 locking ring replacement.
If the plug area is cracked, leaking, or worn, check the Zodiac R0511800 plug replacement before assuming the full housing is the only part needed.
What This Pod Housing Does
The pod housing holds and supports key parts of the compatible AquaPure Ei salt chlorine generator assembly. A damaged housing can affect fitment, sealing, service access, and the stability of the connected components.
Replacing the pod housing can help restore proper assembly fit when the electrode, plug, adapter, locking ring, seals, and surrounding parts are still compatible and serviceable. It will not fix low chlorine output, electrical faults, failed electrodes, control board problems, or incorrect salt levels.
Before You Order
Check these details before purchasing:
- Confirm the exact part number R0512000.
- Verify your system model is APURE35, APURE35PLG, or another supported AquaPure Ei model.
- Compare the housing shape, ports, and connection points with your original part.
- Inspect the electrode, adapter, locking ring, plug, and seals for wear or damage.
- Confirm whether the issue is a cracked housing, worn seal, damaged plug, or failed electrode.
- If you are servicing the locking area, the Zodiac R0512600 locking ring tool replacement may help with removal and installation.
- Do not reuse damaged seals or O-rings when installing a replacement housing.
Installation Notes
Turn off the salt water chlorine generator and pool equipment before removing the old pod housing. Relieve pressure from the system before opening the assembly.
Remove the existing connected parts carefully and note their position before disassembly. Install the replacement housing in the same orientation as the original. Do not force the electrode, plug, locking ring, or adapter into place. If any part does not seat correctly, stop and recheck compatibility before restarting the system.
After installation, run the system and check for leaks, loose connections, poor fitment, or abnormal operation.
Maintenance Tips
To help protect the replacement pod housing:
- Inspect the housing during routine salt cell service.
- Keep sealing surfaces clean and free from debris.
- Replace worn seals, O-rings, or plugs when needed.
- Do not overtighten locking parts or force plastic connections.
- Check the electrode and adapter area before reassembling the unit.
- Follow Zodiac service instructions for cleaning, removal, and installation.














