Product Details
- Product type: DC power cord replacement
- Part number: R0402700
- Cable length: 8 feet
- Brand compatibility: Zodiac AquaPure electronic salt water chlorine generator systems
- Common use: Replacing a damaged or worn DC power cord
- Color: Black
- Best for: Compatible AquaPure systems that need an 8-foot replacement cord
- Installation area: Between compatible AquaPure power/control components and salt system equipment
If your setup needs a longer cord, compare this item with the Zodiac R0402800 16-feet DC power cord replacement before choosing the correct cable length.
Compatibility Notes
This DC power cord is intended for select Zodiac AquaPure electronic salt water chlorine generator systems. It should not be treated as a universal replacement cord for every Jandy, Zodiac, AquaPure, PureLink, or saltwater pool system.
If you are replacing cell-side equipment at the same time, the Jandy PLC700 AquaPure salt chlorine generator replacement cell may be a related product to review separately.
For larger AquaPure cell setups, the Jandy Zodiac AquaPure PLC1400 saltwater cell kit may be relevant, but it should not be confused with this power cord replacement.
When to Replace the Power Cord
This cord may need replacement if the old cord is cracked, cut, loose at the connector, corroded, or causing intermittent power issues. It may also be needed when servicing an AquaPure system where the cord no longer connects securely.
If the system still does not power or communicate correctly after replacing the cord, inspect the power center, cell, control box, and connectors before replacing more parts.
Installation Guidance
Turn off power to the pool equipment before removing or installing this DC power cord. Check the connector area for moisture, corrosion, broken pins, or damage before attaching the new cord.
Route the cable away from sharp edges, hot surfaces, moving equipment, and areas where it can be pinched. After installation, restart the system and confirm that the AquaPure unit powers and communicates normally.
Related AquaPure System Parts
If the power center is damaged or outdated, the Zodiac 6613AP PureLink standard power center may be a related system component to review.
If the chlorinator control area needs inspection, the Jandy salt chlorinator control box may be relevant for some AquaPure/APURE1400 setups.
Maintenance and Care
Inspect the cord during seasonal startup and regular equipment checks. Replace it if the jacket is cracked, the connector is loose, the cable is pinched, or there are signs of corrosion.
Keep the connection area dry and protected according to the manufacturer’s instructions. Do not pull the cord sharply or force the connector into place.














