Product Details
- Product type: Salt chlorine generator cell
- Brand: Pentair
- Model number: 521105
- Cell model: IntelliChlor IC60
- Version: US Version
- Common use: Replacement salt cell for compatible Pentair IntelliChlor systems
- Pool size rating: Verify support for pools up to 60,000 gallons before publishing
- Required power source: Compatible IntelliChlor power center or supported automation system
- Not included: Power center, controller, salt, cleaning kit, unions, plumbing tools, or installation hardware unless listed in the package
For users who need the matching power component, the Pentair 520556 IntelliChlor power center should be reviewed before installing this IC60 cell.
Compatibility Notes
This Pentair IC60 cell should be matched with compatible Pentair IntelliChlor systems only. It should not be selected by appearance alone because IC20, IC40, and IC60 cells may have different output ratings and system requirements.
If your pool is smaller or already uses an IC40 setup, the Pentair 520555 IntelliChlor IC40 salt chlorine generator cell may be a better comparison option.
For lower-output IntelliChlor setups, the Pentair 520554 IntelliChlor IC20 salt chlorine generator cell may be reviewed separately before choosing the right cell size.
Salt Chlorination Use
The IntelliChlor IC60 cell helps produce chlorine from dissolved salt as pool water passes through the cell. Proper chlorine output depends on salt level, water balance, pump run time, water temperature, stabilizer level, and cell condition.
Before startup, test and balance the water. Keep salt, pH, alkalinity, calcium hardness, stabilizer, and chlorine within the recommended range for your pool and Pentair system.
Installation Guidance
Turn off power to the salt chlorine generator system before removing or installing the cell. Confirm the flow direction, union fit, cable connection, and control system setting before startup.
If you are replacing an older cell, inspect the unions, O-rings, cord, and plumbing area for leaks or damage. If the union seals are worn, the IntelliChlor IC series union replacement O-rings may be useful during service.
Electrical and plumbing work should be completed according to the manufacturer instructions. If you are not experienced with pool equipment installation, have the replacement completed by a qualified pool technician.
Salt Cell Cleaning and Maintenance
Inspect the cell regularly for calcium scale and debris. Clean the cell only as directed by the manufacturer and avoid scraping the plates with sharp tools.
For maintenance support, the Pentair 520670 IntelliChlor acid washing kit may help with proper cell cleaning when it is compatible with your IntelliChlor model.
If you are comparing another IC60-style replacement option, the Splash IRCF60 replacement salt cell for Pentair IntelliChlor IC60 may be reviewed separately before ordering.
Troubleshooting Notes
If the IC60 cell does not produce enough chlorine, check salt level, water temperature, stabilizer, pump run time, cell condition, power center status, and any warning lights on the control system.
If the system gives a low-salt, inspect-cell, no-flow, or communication warning, do not replace parts immediately. First confirm water chemistry, flow rate, wiring connection, and compatibility with the installed power center.











