Product Details
- Product type: Flow switch tee replacement
- Part number: GLX-FLO-T
- Common use: Replacement tee fitting for compatible Hayward salt chlorine generators
- Best for: Replacing a cracked, leaking, stripped, or damaged flow switch tee
- Material: PVC-style plastic fitting; verify material details before publishing
- Installation area: Pool plumbing line near the salt cell and flow switch
- Tee only: Flow switch, cable, connector, and control parts are not included unless listed in the package
- Compatibility: Select Hayward Aqua Rite, Aqua Rite Pro, Aqua Plus, Pro Logic, Mineral Springs, and SwimPure systems; verify exact models before publishing
If your current switch and cable are also damaged, compare this tee with the Hayward GLX-FLO 15 feet cable flow switch before replacing only the fitting.
Compatibility Notes
This GLX-FLO-T tee is intended for compatible Hayward salt chlorine generator plumbing setups. It should not be treated as a universal PVC tee for every pool system, chlorinator, or flow switch.
If you need the switch assembly without a tee, the Hayward GLX-FLO-RP 15 cable flow switch assembly without tee may be a better match.
For a full replacement option that includes a PVC tee and switch assembly, review the flow switch assembly with PVC pipe tee before ordering separate parts.
When to Replace the Flow Switch Tee
This tee may need replacement if the fitting is cracked, leaking, cross-threaded, stripped, or damaged during flow switch removal. It may also need replacement if the switch no longer seats properly in the tee.
Do not replace the tee only if the flow switch paddle, cable, or connector is damaged. In that case, the switch assembly may also need inspection.
Installation Guidance
Turn off power to the pump and salt chlorine generator before working on the plumbing. Release system pressure and confirm the correct plumbing size and flow direction before removing the old tee.
Install the tee in the proper orientation so the flow switch can sit correctly in the water stream. Use appropriate PVC plumbing methods and allow the connection to cure fully if required before restarting the pump.
After installation, check for leaks and confirm that the salt chlorine generator recognizes proper flow.
Related Flow Switch Options
If your system uses the standard GLX-FLO-RP style switch, the GLX-FLO-RP 15-feet cable flow switch assembly may be a related replacement option.
For complete system reference, the Hayward W3AQR15 AquaRite salt chlorination system can help buyers understand the type of salt system that commonly uses flow switch monitoring.
Maintenance and Troubleshooting
Inspect the tee during seasonal startup and whenever a flow switch is removed. Replace it if you see cracks, thread damage, leaks, or signs that the flow switch no longer tightens securely.
If flow warnings continue after replacing the tee, check the flow switch, cable, connector, pump basket, filter, valves, salt cell scaling, and overall water circulation before replacing more parts.









