Product Details
- Brand: Hayward / Goldline
- Part Number: AQL2-BASE-RF
- Product Type: AquaConnect wireless antenna / base station
- Use Case: Replacement wireless antenna for compatible Hayward pool control systems
- Listed Product Dimensions: 12 x 5 x 1 inches
- Listed Item Weight: 13.2 ounces
- Compatibility Note: Check your Hayward automation model before purchase
- Installation Note: Professional installation may be recommended if wiring or system pairing is required
Compatibility and System Use
This wireless antenna is commonly used with compatible Hayward AquaConnect automation setups where wireless communication is needed between control equipment and supported remotes or interfaces. If your pool system already uses a Hayward AquaTrol salt chlorination system, confirm whether this antenna is part of your control setup before ordering.
For in-ground pool owners using a larger Hayward salt system, check your automation setup carefully if pairing with a Hayward AquaRite salt chlorination system. The antenna should only be installed when the system model and control requirements match the part number.
When to Replace the AquaConnect Wireless Antenna
Replace this unit if the existing antenna is physically damaged, has a broken cable, does not pair correctly, or communication between the pool control and wireless device becomes unreliable. If the issue is related to the control board instead of signal communication, compare the system with a Hayward AquaRite circuit board replacement before buying the antenna.
Installation and Setup Notes
Turn off power to the pool control system before replacing or connecting any electrical component. Mount the antenna in the correct position, keep the cable protected, and follow the system manual for pairing or configuration steps. If the antenna does not communicate after installation, check power, wiring, system compatibility, and remote setup before assuming the part is faulty.
Buyer Check Before Ordering
This part should not be purchased only by appearance. Match the part number, cable connector, and supported system before installation. Pool owners comparing automation and salt chlorination parts may also review a Hayward W3AQR9 AquaRite system if they are checking related Hayward equipment for the same pool setup.
Maintenance Notes
Keep the antenna housing clean and protected from heavy impact, loose wiring, and unnecessary moisture exposure. During seasonal maintenance, inspect the wire connection and make sure the antenna remains securely mounted. If signal issues return after replacement, the problem may be with the control panel, remote, or automation configuration rather than the antenna itself.










