Product Details
- Product type: Bracket fan with mounting replacement
- Brand: Hayward
- Part number: GLX-FAN
- Use: Replacement fan component for compatible Hayward control units
- Compatible system type: Select Hayward AQR Goldline Aqua Rite salt chlorine generators
- Best use case: Replacing a failed, damaged, or noisy internal fan in a compatible Aqua Rite system
- Package contents: Confirm whether mounting hardware, screws, wiring, or instructions are included
- Installation requirement: Power must be fully off before servicing any electrical control unit
Compatibility and Buyer Check
Before ordering, confirm that your Hayward system manual or existing part label calls for GLX-FAN. This part is commonly associated with Hayward AQR Goldline Aqua Rite salt chlorine generator systems, but compatibility should always be verified by model number and control unit layout.
Do not order by image alone. Fan assemblies, brackets, wiring connectors, and mounting points can look similar but may not fit every Hayward control box.
If your system has board-related problems, check the Hayward GLX-PCB-RITE main circuit board before replacing only the fan. If the display panel is the issue, review the Hayward GLX-PCB-DSP Aqua Rite PCB display instead.
What This Fan Replacement Does
The fan helps move air inside the compatible control unit area. Proper airflow can help the control box operate more reliably when the fan, bracket, and wiring are installed correctly.
Replacing the fan may help when the old fan is visibly damaged, making noise, not spinning, or no longer mounted securely. It will not fix every salt system problem. No power, board errors, low chlorine output, incorrect salt readings, or no-flow messages may also come from the PCB, transformer, flow switch, salt cell, or wiring.
Before You Order
Check these details before purchasing:
- Confirm the exact part number GLX-FAN.
- Verify that your system is a compatible Hayward AQR Goldline Aqua Rite model.
- Compare the fan size, bracket shape, wire connector, and mounting points with the original part.
- Inspect the control box for burned wiring, moisture, corrosion, or loose connections.
- If the transformer is damaged, review the Hayward GLX-XFMR transformer replacement before ordering only the fan.
- If the fuse area is damaged, check the Hayward GLX-FUSE-20 fuse holder replacement kit.
- If you are repairing the full Aqua Rite system, compare your setup with the Hayward W3AQR15 AquaRite salt chlorination system.
Installation and Safety Notes
Turn off power at the breaker before opening the control unit or touching any electrical part. Do not work on pool electrical equipment while power is connected.
Before removing the old fan, take a clear photo of the wiring, bracket position, and connector location. Install the replacement fan in the same orientation as the original. Do not force the bracket or connector into place.
After installation, confirm that the fan is secure, wiring is clear of moving blades, and no wires are pinched before restoring power.
Maintenance and Troubleshooting Tips
To help protect the replacement fan and control unit:
- Keep the control box closed and protected from moisture.
- Inspect vents and openings for debris during service.
- Do not ignore fan noise, loose mounting, or burned wire smells.
- Check wiring and terminals before replacing multiple parts.
- Maintain the salt cell and water chemistry to reduce system strain.
- Follow the Hayward service manual for diagnostic steps before replacing electrical components.











