Product Details
- Product Type: T-15 salt cell replacement
- Brand: Zuqioia
- Model Number: BLT15H
- Compatible Cell References: T-Cell-15, W3T-CELL-15, T-15, GLX-CELL-15-W, TCELL940, T-CELL-15-SWP, BLT15H, and BLW1T15H should be verified
- Recommended Pool Type: Inground and above-ground pools should be verified
- Listed Pool Capacity: Up to 40,000 gallons
- Compatible Systems Listed: AquaRite, AquaRite Pro, SwimPure Plus, TurboCell, OmniLogic, OmniHub, ProLogic, and AquaPlus should be verified
- Recommended Salt Concentration: 3,000 ppm should be verified
- Product Benefits Listed: Kills bacteria, supports low-odor sanitization, and helps prevent corrosion
- Number of Items: 1
- Product Dimensions: 15.8 x 6.85 x 4.2 inches
- Item Weight: 5.46 pounds
- Cord Length: 13.5 ft should be verified before publishing
- Installation Note: Match the old cell, unions, cord connection, and controller setting before installation
- Maintenance Note: Clean and inspect the cell according to the manual
Compatibility and System Fit
This product is useful for buyers comparing a T-Cell-15 replacement salt cell for compatible Hayward-style salt chlorination systems. Always check the old salt cell label and confirm that your controller supports a T-15 / W3T-CELL-15 style replacement.
If you are comparing a T-Cell-15 replacement for Hayward, verify that your system supports T-Cell-15, W3T-CELL-15, T-CELL-15-SWP, BLT15H, or the exact part number shown in your manual. A similar-looking cell may not work correctly if the controller, cord, or union connection is different.
40,000-Gallon Pool Use
This replacement is listed for pools up to 40,000 gallons. A W3T-CELL-15 turbo salt cell should be matched with the correct pool size, salt concentration, pump run time, and controller output setting before installation.
Salt chlorination performance can vary based on water temperature, stabilizer level, salt level, pool usage, and filtration time. After installation, test chlorine level and adjust the system gradually based on actual water test results.
Installation Guidance
Before installation, turn off the pool equipment and disconnect the old cell from the control system. Inspect the O-rings, unions, cable connection, and flow direction before installing the new cell.
A salt chlorination replacement should be checked after startup for leaks, stable salt readings, correct water flow, and normal chlorine generation. If the control panel shows an error, confirm the cell type setting before continued use.
AquaRite and T15 Replacement Notes
Buyers comparing a salt cell replacement AquaRite should confirm the software version, controller setting, and listed compatibility before ordering. Some systems require the correct T-15 cell setting to read salt level and generate chlorine properly.
Do not rely only on pool capacity when choosing a replacement. Cord style, controller recognition, union size, and system compatibility are also important for safe and correct operation.
Cleaning and Maintenance
Clean the cell only as recommended by the product manual. If scale buildup appears, check salt level, pH, calcium hardness, alkalinity, and stabilizer before using the system again.
Avoid scraping the cell plates with sharp tools. Regular inspection can help reduce flow issues, incorrect salt readings, and avoidable performance problems.
Before You Buy
This product is best for buyers replacing a compatible T-15 style salt cell for a pool salt chlorination system up to 40,000 gallons. You can also check current marketplace details before purchase to compare price, availability, product photos, and buyer feedback.
