Product Details
- Product Type: Salt cell for pool / salt chlorination replacement cell
- Brand: Crispaire
- Model Number: FBA-ZTYL-40K
- Compatible Cell References: W3T-CELL-15, T-CELL-15, T-CELL-15-SWP, BLT15H, and T-Cell-15 should be verified
- Recommended Pool Type: Inground and above-ground pools should be verified
- Listed Pool Capacity: Up to 40,000 gallons
- Chlorine Output Reference: 2.1 lbs/day should be verified before publishing
- Cell Life Reference: 7,000 hours should be verified before publishing
- Product Benefits Listed: Kills bacteria
- Number of Items: 1
- Product Dimensions: 12 x 3 x 3 inches
- Item Weight: 4.7 pounds
- Installation Type: Tool-free setup for compatible existing systems
- Maintenance Note: Clean every 3–6 months according to the manual
- Important Note: Confirm compatibility with your control panel before installation
Compatibility and System Fit
This product is useful for buyers comparing a T-Cell-15 replacement salt cell for compatible Hayward-style salt chlorination systems. Always check the existing cell label and control panel setting before ordering.
If you are comparing a T-Cell-15 replacement for Hayward, verify that your system supports W3T-CELL-15, T-CELL-15, T-CELL-15-SWP, BLT15H, or the exact replacement model shown in your manual. Similar-looking cells may not work correctly if the controller or cord connection is different.
40,000-Gallon Pool Use
This replacement cell is listed for pools up to 40,000 gallons. A W3T-CELL-15 turbo salt cell should be matched with the correct pool size, salt level, pump run time, and controller output setting before installation.
Salt chlorination performance can vary based on water temperature, stabilizer level, pool usage, salt level, and filtration time. After installation, test the water regularly and adjust the system gradually based on actual chlorine readings.
Installation Guidance
This cell is designed to connect directly to compatible existing systems when the fittings and controller match. Before installation, turn off the pool equipment, remove the old cell carefully, inspect O-rings and unions, then install the new cell according to the manual.
A salt chlorination replacement should be checked after startup for leaks, correct water flow, stable salt readings, and proper chlorine generation. If the control panel shows an error, confirm the cell type setting before continued use.
AquaRite and T15 Replacement Notes
Buyers comparing a salt cell replacement AquaRite should confirm the software version, cell setting, and compatibility list before ordering. A T15-style cell may fit many compatible systems, but the controller must recognize the correct cell type.
Do not assume compatibility only from pool capacity. Cable connection, union size, controller setting, and flow direction are also important for safe and correct operation.
Cleaning and Maintenance
Clean the cell every 3–6 months, or as recommended by the manual and local water conditions. If scale builds up quickly, check salt level, pH, calcium hardness, alkalinity, and stabilizer before using the system again.
Avoid scraping the plates with sharp tools. Use only the cleaning method approved in the product instructions to help protect the cell and maintain reliable performance.
Before You Buy
This product is best for buyers replacing a compatible T15-style salt cell for a pool salt chlorination system up to 40,000 gallons. You can also check current marketplace details before purchase to compare price, availability, product photos, and buyer feedback.
