T-15 Salt Cell Replacement for Hayward AquaRite, AquaRite Pro, SwimPure Plus, up to 40,000 Gallons In-Ground, W3T-CELL-15, T-CELL-15-SWP, TCell 15, T-Cell 15

This T-15 salt cell replacement is made for compatible Hayward-style salt chlorination systems used with in-ground pools up to 40,000 gallons. It is designed as a direct replacement option for select T-15 style cells, including W3T-CELL-15, T-CELL-15-SWP, T-Cell 15, TC-15, T-15, TCELL940, and GLX-CELL-15-W references.

Before buying, check your existing salt system model, controller setting, cable connection, union size, and pool capacity. This cell should be matched by part number and system compatibility, not only by product image or general appearance.

Description

Product Details

Product Type: T-15 salt cell replacement
Compatible Pool Type: In-ground swimming pools
Listed Pool Capacity: Up to 40,000 gallons
Compatible References: W3T-CELL-15, T-CELL-15-SWP, TC-15, T-15, TCell 15, T-Cell 15, TCELL940, and GLX-CELL-15-W
Compatible Systems: AquaRite, AquaRite Pro, SwimPure Plus, OmniLogic, OmniHub, ProLogic, AquaPlus, AquaRite XL, NatureSoft, SmartPure, Mineral Springs, and Blue Essence systems
Item Model Number: T-CELL-15-SWP, W3T-CELL-15, T-Cell 15
Item Weight: 5.39 pounds
Product Dimensions: 14 x 7 x 7 inches
Installation Type: Direct replacement cell
Placement Option: Can be installed vertically or horizontally when the plumbing layout allows
Number of Items: 1
Maintenance Note: Inspect and clean the salt cell as recommended by the system manual

Compatibility and Replacement Fit

This product is useful for buyers comparing a T-Cell-15 replacement salt cell for compatible Hayward AquaRite and similar salt chlorination systems. Match the part number on your old cell before ordering to avoid buying the wrong replacement.

A T-Cell-15 replacement for Hayward systems should be checked against the controller, cell type setting, cable connection, and original part number. If your system uses AquaRite, AquaRite Pro, SwimPure Plus, OmniLogic, OmniHub, ProLogic, or AquaPlus, confirm the system accepts a T-15 style replacement cell.

Installation Guidance

This salt cell is designed as a direct replacement, so it may fit into the existing plumbing setup when the old cell, unions, and controller are compatible. Buyers replacing a Hayward T-Cell-15 salt cell should confirm union size, flow direction, and controller recognition after installation.

The cell may be installed vertically or horizontally if your current system layout supports that position. After installation, check for leaks, confirm proper water flow, and verify that the control panel reads the cell correctly.

Pool Size and System Use

This replacement cell is listed for in-ground pools up to 40,000 gallons. If you are comparing a W3T-CELL-15 turbo salt cell, make sure the pool size rating and compatible part numbers match your existing salt chlorination system.

Salt output can vary based on water temperature, salt level, pump run time, stabilizer level, and controller settings. Test the pool water after installation and adjust the output gradually instead of making large changes at once.

AquaRite System Notes

This replacement may be suitable for pool owners using an AquaRite salt chlorination system, but compatibility should always be verified with the exact controller and cell type setting. Some systems may require the controller to be set to a T-15 cell type before the replacement works correctly.

For long-term use, clean the cell only according to the manufacturer’s instructions. Avoid scraping the plates with sharp tools, and do not use harsh cleaning methods unless approved in the manual.

Before You Buy

This product is best for replacing a compatible T-15 style salt cell on an in-ground pool system. You can also check current marketplace details before purchase to compare pricing, availability, product photos, and buyer feedback.