Product Details
- Product name: Hayward W3T-CELL-9 TurboCell Salt Chlorination Cell
- Model number: W3T-CELL-9
- Pool type: In-ground swimming pools
- Pool size compatibility: Up to 25,000 gallons
- Pattern name: TurboCell
- Product dimensions listed: 11.7 x 5.6 x 3.8 inches
- Item weight listed: 3.83 pounds
- Main use: Replacement salt chlorination cell
- Compatible systems listed: AquaRite, AquaRite Pro, SwimPure, OmniLogic, OmniHub, ProLogic, and AquaPlus
- Category: Replacement Kit
Compatibility and System Fit
The W3T-CELL-9 is made for pool owners who need to replace an existing Hayward TurboCell without changing the full salt chlorination system. It should be matched to the correct control board setting so the system reads salt level and chlorine output properly.
If your pool is larger than 25,000 gallons, compare this model with a higher-capacity option such as the T-CELL-15 Salt Water Pool Chlorinator System before choosing a replacement. If you are replacing a smaller Hayward-style cell, the Salt Cell Up to 15000 Gallons may be useful to review for lower-capacity pool systems.
Salt Chlorination Cell for Swimming Pools
This TurboCell helps generate chlorine as part of a compatible saltwater pool system. When properly matched with the control unit, salt level, and pool size, it can support steady chlorine production and reduce the need for frequent manual chlorine dosing.
For best performance, the pool water should be balanced before installation. Low salt, high calcium, poor water flow, dirty cell plates, or incorrect control panel settings can affect chlorine output and salt readings.
Installation and Setup Notes
Turn off power to the pool equipment before removing the old salt cell. Inspect the unions, O-rings, cable connection, and flow direction before installing the replacement cell. After installation, check that the control box is set for the correct TurboCell model.
If you need to temporarily bypass the cell during service, the Hayward GLX-CELL-PIPE Turbo Cell Straight Pipe Placeholder Replacement may help with compatible Hayward-style plumbing setups.
Cleaning and Maintenance Guidance
Inspect the TurboCell regularly during the pool season. If calcium scale appears on the plates, clean the cell according to the manufacturer’s instructions. Do not scrape the plates with sharp tools, and do not over-clean the cell unless buildup is present.
For cell cleaning support, the Pool Cleaning Stand GLX-CELLSTAND Replacement can be reviewed as a compatible maintenance accessory for Hayward Turbo Cell-style cleaning.
Before You Buy
Choose this W3T-CELL-9 cell only if your existing system supports this model and your pool is within the listed 25,000-gallon range. Buyers comparing Hayward-style salt cells may also review the Rula Salt-Cell Compatible with Hayward T-Cell-15 if they are looking at T-Cell-15 style replacement options for larger compatible pools.
