Why is my Pentair salt cell not producing chlorine?
If you have a Pentair IntelliChlor IC40 salt chlorine generator system, you may be wondering why it’s not producing chlorine. There are a few possible reasons for this. First, make sure that the salt cell is properly installed and that the power supply is connected. If everything looks to be in order, check the salt level in the pool. It should be between 3000 and 4000 ppm. If it’s too low, the system won’t produce chlorine. Another possibility is that the pH of the pool water is too high or too low. The ideal range is 7.2 to 7.6. Finally, make sure that the circulation pump is running continuously while the system is on. If none of these things seem to be the problem, please contact Pentair customer service for further troubleshooting assistance.
How do I know if my Pentair salt cell needs replacing?
If your Pentair IntelliChlor IC40 salt chlorine generator system isn’t working properly, it may be time to replace the salt cell. Here are a few things to look for that can indicate it’s time for a new salt cell:
– decreased chlorine production
– higher than normal levels of chloramines in the pool
– metal corrosion or staining around the salt cell
If you notice any of these issues, it’s best to contact a professional to assess the situation and recommend the best course of action. Trying to troubleshoot and repair a salt cell can be difficult and dangerous, so it’s always best to leave it to the experts.
What size Pentair salt cell do I need?
The size of the Pentair salt cell you need will depend on the size of your pool. If you have a small pool, you can get away with the IC40, but if you have a larger pool, you’ll need the IC60. The IC40 is also more affordable, so it’s a good option if you’re on a budget.
How much chlorine does IC40 produce?
The Pentair Intellichlor IC40 is a salt chlorine generator system that produces chlorine by electrolysis. The amount of chlorine produced by the system depends on the amount of salt added to the water. The recommended salt concentration for the Intellichlor IC40 is between 2.0 and 3.0%. This results in a chloride concentration of approximately 5,000 – 7,500 ppm.