intex 26669eg krystal clear saltwater chlorination system

Showing the single result

How does the Intex Krystal Clear saltwater system work?

The Intex Krystal Clear saltwater system is a filtration system that uses salt to kill bacteria and algae in swimming pool water. The system consists of a pump, filter, and saltwater chlorinator. The pump circulates the pool water through the filter to remove dirt and debris. The filtered water then passes through the saltwater chlorinator, where salt is added to the water to kill bacteria and algae. The treated water is then returned to the pool.

How long does an Intex saltwater system last?

An Intex saltwater system can last for quite a while if it is properly maintained. The length of time it lasts will depend on how often it is used and how well it is taken care of. If the system is only used occasionally, it could theoretically last forever. However, if it is used regularly, it will likely need to be replaced after about 3-5 years. Proper maintenance includes regularly cleaning the system and replacing the filter cartridges as needed. With proper care, an Intex saltwater system can provide years of trouble-free operation.

How much salt do I put in my Intex saltwater system?

If you have an Intex saltwater system, you may be wondering how much salt to add. The amount of salt you’ll need will depend on the size of your pool and the type of salt you’re using. For a standard 35,000-gallon pool, you’ll need about 200 pounds of salt. If you’re using a coarse-grained salt, such as solar salt or rock salt, you’ll need about 40% more than this. For a fine-grained salt, such as evaporated salt or table salt, you’ll need about 20% less. Once you’ve determined how much salt you need, add it to your pool gradually over the course of a few days. This will give your system time to adjust and prevent any problems from too much salt being added at once.

How long should I run my Intex salt chlorinator?

As a general rule of thumb, you should run your Intex salt chlorinator for around 8 hours per day. This will ensure that the pool water is properly sanitized and that the chlorine levels are maintained at a safe level. Of course, you may need to adjust this based on the size of your pool and the number of swimmers using it. If you have a very large pool or a lot of swimmers, you may need to run the chlorinator for longer periods of time. Conversely, if you have a small pool or few swimmers, you may be able to get away with running it for shorter periods of time. Ultimately, it’s important to test the chlorine levels regularly and make adjustments as needed.